You know my hanging headband organizer?? Still one of my most popular posts, and I’ve sold 35 of them online!

Well a scarf loving friend pointed out they’d be great for scarves and sashes, so I tried it!

It works awesome!

To make your own, follow the Hanging Headband Organizer tutorial but make it  4 feet long rather than door length.

You can also adjust the size of your loops to fit your scarf collection.

These are my guidelines:

For Silk Scarves and Ties:
- The top third has loops spaced every one inch. (Perfect for sashes)
- The middle third has loops spaced every 1.5 inches. (Perfect for squares)
- The bottom third has loops space every 2 inches. (Perfect for wider silk scarves)
For Knit Scarves:
- The top third has loops spaced every 2 inches. (For the thin cottony kind)
- The middle third has loops spaced every 2.5 inches. (For the thicker knits)
- The bottom third has loops space every 3 inches. (For the chunky knits)

The bottom elastic isn’t as needed in the scarf holder. Hang with an over the door hook or a 3M command hook.

Gotta love vertical storage solutions!

Here’s how to use it:

 

If you love the idea but don’t sew I try and keep them stocked in my shop or email me and I’ll make you a custom one.

This post is partying here.

I made this for a baby shower of a dear friend and it turned out super cute, and using grosgrain ribbon makes it so easy and fast!

Materials:

• 14” Ribbon, with fray checked or heat sealed edges
• 1 Suspender Clip 
• 4” inches of elastic
• Thread

Form your elastic into a loop, sandwich the ends into the end of the ribbon folded in half. Stitch several times with a shortened stitch.

Stitch the ribbon in half long ways. All the way to the end. (Match your stitch length to the grain of the ribbon and it’ll be invisible!)

Thread on your suspender clip and stitch the loop shut!

Materials for a Queen Duvet:

• King Top Sheet
• Queen Top Sheet (I found the individual sheets at target feel really great for the money)
• Sewing Machine
• Buttons or Ribbon for closure

Directions

Prewash both sheets
Iron the King size sheet
Fold and iron the top sheet make yourself a pressed line grid so that your tufts end up straight.
Layout the queen sheet on the floor of your work area, this bottom, sheet is your “sizing guide”
Twist and tuft as desired. I alternated, 'more dramatic tufts’ with ‘smaller tufts’ to get the effect I wanted. While tufting you’ll need to watch the size, the top King sheet can’t get smaller than the bottom Queen sheet.
You’ll need to pin your tufts well to ensure they make it through moving, I did this by ‘weaving’ the pin back and forth to keep the twist.
To keep the tufting sizes consistent I used my seam gauge to measure “the depth” of the twist. My “dramatics” were 2” inches and my smaller ones were 1 inch.
Carefully sew your tufts using a denim needle and a short stitch length. I went back and forth several times to ensure it kept it’s twist. At this point your top sheet resembles, Belle’s Yellow Ball gown.

Once your completely tufted it’s time to match up both the top and bottom pieces right sides together. I found the easiest place to do this was on the bed.
Now you’re going to center the king size sheet on top of the Queen sheet, and pin the top and sides together, I used safety pins to make it easier. You will need to ease in the excess fabric into the seam as you go with little pleats.
Since the Queen sheet is already so nicely hemmed, I used my zipper foot to ‘ride’ along the Queen sheets hem to keep it straight.
After ‘riding’ the Queen’s already done hem you’ll have some excess fabric on each side, so I did a rolled hem on my serger so it won’t fray. (If you don’t have a serger you can pinking shear cut your excess).
On your open side on the bottom, you’ll have extra excess, so you’ll need to decide how you want your closure to work then, you’ll hem it as needed.
I still haven’t added a closure to the bottom (want to do a dramatic color but can’t decide which!)  but you could do ribbon ties or buttons easily.

Sew along with me as we make a traditional prairie girl calico dress for Kirsten.
This is made from one of the original patterns released by Pleasant Company, they have since been discontinued, but you can download a printable version at AG Play Things, they print out well, I chose to just print the pattern pages, and read the directions on my ipad.
This dress is called Kirsten’s school dress, and requires a 1/2 yard of fabric, and 6” inches of Velcro.
All of my step numbers correspond with the patterns, many pattern steps have components so I have added, A,B,C etc. to make it easy to follow both set of directions. (My directions are complete, but I want to make them match).
All seam allowances at 1/4” unless stated otherwise.
1. First get your pattern pieces cut out and we can get started!
2 A. Stitch the front bodice to the two back bodice pieces right sides together. (For many of these seams I’ve just drawn a chalk line at 1/4” and serged the seam. If you don’t have a serger just sew with a 1/4” seam allowance.
2 B. Transfer the dots from the front bodice pattern piece to the front bodice. Sew a basting stitch (Low tension, long stitch) a little past those two dots. Lightly gather. (You’ll adjust the gather to the neckline in the next step)
2 C. Clip neckline curve.
3. Attaching the neckband.
3 A. Press the neckband like you would double fold bias tape.
3 B. Using clips (easier than pinning) clip the ‘neckband bias tape’ around the clipped edge. Adjust the gather to make the neckband match the neckline.
3 C. Carefully stitch along the bottom edge of the neckband with a 1/8” seam allowance and a 1 mm stitch length. (Whenever top stitching I use a very small stitch to keep everything in scale).
4. Preparing Sleeves for attaching to the bodice.
4 A. Transfer the gathering dots to the top curves of the sleeves.
4 B. Sew a gathering stitch (Low tension, long length) a little past the two dots and a long the entire bottom edge of the dress.
4 C. Press the two sleeve bands like double fold bias tape just like you did the neckband.
4 D. Adjust the bottom edge gathers to match the length of the sleeve band and ‘clip’ around the gathered edge encasing the edge.
4 E. Sew the sleeve bands with a 1/8” seam allowance and a 1mm stitch length (Don’t forget to reset your tension from gathering as well!)
5. Attaching the sleeves to the bodice.
5 A. Adjust gathers to match the pattern ‘dots’ on the sleeve to the ‘dots’ on the bodice. Clip or pin together.
5 B. Sew very carefully with a 1/4” seam allowance. Making sure you catch both pieces of fabric. (With this step I always sew it first, then serge within the seam allowance).
5 C. If you have a serger, serge within the seam allowance carefully to prevent fraying.
6. Sewing the bodice together & adding sleeve Velcro. (This is my first major departure from the pattern directions).
6 A. Serge the entire length of the sleeve and bodice edges on all 4 lengths.
6 B. Cut a 1” piece of 3/4” Velcro in half down the middle, giving you two pieces of 3/8” Velcro 1” long. The ‘hook’ is going to be on the bodice back side of the sleeve, and the ‘loop’ is going to be on the bodice front side.
6 C. Using a ‘zig zag’ stitch the ‘hook’ to the ‘right side’ of the ‘bodice back’ side of the sleeve. Align it so that the bottom of the Velcro matches the start of the ‘sleeve band’.
6 D. Press the ‘hook’ folded under with a 1/8” seam. Stitch a 1/8” seam to the ‘dot’ on the sleeve. You are effectively making the ‘loop’ of the Velcro be on the inside of the sleeve.
6 E. Stitch the ‘loop’ side of the Velcro on to the ‘right side’ of the fabric on the ‘front bodice’ side of the sleeve. Align the bottom of the Velcro with the sleeve band. Zig-zag stitch on the left side of the Velcro allowing the right side to hang off the edge of the fabric.
6 F. Line up seams and sew fronts and backs together with a 1/4” Seam, only sew to the ‘dot’ on the sleeve, not to the wrist.
7 & 8.  Pattern Steps 7 & 8 were incorporated into my steps 6 B-E so skip.
9. Adding the waistband.
9 A. Gather the bottom of the bodice. with a gathering stitch.
9 B. Match length of the waistband with length of the gathered bodice. Sew right sides together with 1/4” seam allowance.
10. Attaching the Skirt
10 A. Make the ‘grow stripes’ which are really just deep pin tucks in the skirt following the pattern, press
10 B. Sew your tucks, by folding, and then sewing along the edge to create tucks of fabric.
10 C. Serge the side seams of the skirt
10 D. Sew to the skirt into a tube, up to the dot.
10 E. Sew a gathering stitch on the top of the skirt.
10 F. Gather skirt to match the waistband, Sew skirt to waist band right sides together.
10 G. Serge waistband seam allowance carefully for a cleaner look.
11. Pattern step 11 corresponds to step 10 D.
12. Finishing back Edges.
12 A. I like to just serge each edge, and do the rest with the Velcro.
13. Attaching the Velcro. I use a 5” piece of 3/4” Velcro cut in half lengthwise.
13 A. Sew with a zig-zag stitch the ‘hook side of the Velcro to the back left side of the bodice to the right side of the fabric as shown, with some hanging over the edge. Line up the top of the Velcro with the neckband. (I use clips since pinning Velcro is tough).
13 B. Fold the Velcro over to to the inside of the dress. Clip. Stitch with a 1/8” Seam
13 C. Sew the ‘loop’ of the Velcro to the back right side of the bodice using a zig-zag stitch on the right side of the fabric. Have it hang over the edge some. 
14. Finishing the bottom hem.
14 A. Serge bottom hem. (If you don’t have a serger make a double fold hem).
14 B. Press under serged edge and sew with a 1/8” seam.
Inside and out completed photos to help you see ‘the big picture’


This post is partying here.